Hit enter to search or ESC to close

Repeater Major Modification Request

A Major Modification Request should be submitted when a repeater is moved to a different location and/or if the antenna height is changed compared to the originally coordinated parameters, or if there is a change of transmitter power, feedline loss, or antenna gain that results in an change of Effective Radiated Power (ERP). Any change to the RF footprint of the repeater is considered a Major Modification.

First and Last name of the person submitting this request.
Enter the name of the organization or the callsign of the person or club sponsoring the repeater.
Enter the transmitter frequency in MHz.
Is the receiver and transmitter sharing a common antenna?
Check all modes that are enabled on the repeater
Enter CTCSS tone or DCS code required to access the repeater or "CSQ" for carrier squelch.
Enter CTCSS tone or DCS code the repeater transmits or "CSQ" for carrier squelch.
Enter the repeater ID issued by RadioID.net.
Is the repeater for open use by amateurs?
If the organization sponsoring the repeater has a website please enter the URL here.
Check all that apply.
Enter the height above ground in feet (whole numbers only.)
Enter the height above ground in feet (whole numbers only.)
Click to use ERP Calculator.
If using a duplexer enter the power measured after the duplexer. Whole numbers only.
Enter as decimal degrees, not DEG-MIN-SEC. Example: 39.34532
Enter as decimal degrees, not DEG-MIN-SEC. Example: -97.26456
Enter as decimal degrees. Example: 39.34532
Enter as decimal degrees. Example: -97.26456
Select the region you wish to be listed in for the next ARRL directory.
Use this area to include additional information.
I certify that I am the custodian of record and that I have authorization to submit changes affecting this coordination.
reCAPTCHA Public Key not found. Both Public and Private keys must be set in order for reCAPTCHA to function.

All content © 2025 Kansas Repeater Council, Inc.